How to install lights in HDD

Go down

How to install lights in HDD

Post by Sir Jake on Sun Mar 07, 2010 6:07 am

This tutorial will show you the proper way to install lights in your hdd.


How to install lights in Xbox 360 HDD



Items needed:


•LED's of your choice

•Wire

•Hot glue gun

•A Soldering Iron

•Solder

For this tutorial we will be using a HDD that has been modified so we can see through it.


Step 1: Take apart the HDD








Step 2: Take out the HDD cables








Step 3: The wires we will be modifying are the yellow and black cables









Step 4: Strip a small section of the Yellow (5v) and Black (Ground) wire






Step 5: Solder all the leds to the wires you have.







Step 6: Solder a wire to the Yellow and Black wire and hot glue it to the side of the case.









Step 7: Hot glue all the leds in the spots you would like them to be







Step 8: Solder all the wires and leds together. Make sure that each led is attached to a wire coming from the yellow wire, and the other part of the led coming from the black wire. then reassemble your case.




Ninja'd from http://www.se7ensins.com

Sir Jake
Admin
Admin

Posts : 467
Join date : 2010-01-29
Age : 23

Back to top Go down

Re: How to install lights in HDD

Post by O SyndromE O on Sun Mar 07, 2010 4:40 pm

=O thats kool a.f imma make mi frend do it for me kuz im lazy a.f
avatar
O SyndromE O
Rookie
Rookie

Posts : 26
Join date : 2010-02-20
Age : 25
Location : California

Back to top Go down

Re: How to install lights in HDD

Post by Sir Jake on Sun Mar 07, 2010 4:44 pm

haha that sounds like a good idea haha

Sir Jake
Admin
Admin

Posts : 467
Join date : 2010-01-29
Age : 23

Back to top Go down

Re: How to install lights in HDD

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum